64
SET MENU
OPTICAL IN for OPTICAL INPUT jacks (3), (4), (5)
and (6)
Choices: CD, PHONO, DVR/VCR 2, VCR 1, CBL/SAT,
DTV, DVD, MD/TAPE, CD-R
COAXIAL IN for COAXIAL INPUT jacks (7), (8) and
(9)
Choices: CD, PHONO, V-AUX, DVR/VCR 2, VCR 1,
CBL/SAT, DTV, DVD, MD/TAPE, CD-R
• You cannot select a specific item more than once for the same
type of jack.
• When you connect a component to both the COAXIAL and
OPTICAL jacks, priority is given to the input signals from the
COAXIAL jack.
■
Input mode
B)INPUT MODE
Use this feature to designate the input mode for sources
connected to the DIGITAL INPUT jacks when you turn on
this unit (see page 40 for details about the input mode).
Choices:
AUTO
, LAST
• Select “AUTO” to allow this unit to automatically
detect the type of input signal and select the
appropriate input mode.
• Select “LAST” to set this unit to automatically select
the last input mode used for that source.
The last setting for the EXTD. SUR button will not be recalled,
even when “LAST” is selected.
■
Input rename
C)INPUT RENAME
Use this feature to change the name of the inputs on the
OSD and front panel display.
1
Press an input selector button to select the
input you want to change the name of.
2
Set AMP/SOURCE/TV to AMP.
3
Press
l
/
h
to place the _ (under-bar) under
the space or the character you want to edit.
4
Press
k
/
n
to select the character you want
to use and
l
/
h
to move to the next one.
• You can use up to 8 characters for each input.
• Press
n
to change the character in the following
order, or press
k
to go in the reverse order:
A to Z, space, 0 to 9, space, a to z, space, #, *, +,
etc.
5
Repeat steps 1 through 4 to rename each
input.
6
Press
h
repeatedly to exit from INPUT
RENAME.
Notes
Note
.
(3)
;;;;;
CD
(
CD
)
(4)
;;;;;
DVD
(DVD )
(5)
;;;;;
DTV
(DTV )
OPTICAL IN
.
(7)
;;;;;
CD
(
CD
)
(8)
;;;;;
DVD
(DVD )
(9)
;;;;;
DVR/VCR2
(DVR/VCR2)
COAXIAL IN
/
: Exit
p
p
</> : Select
[
AUTO
LAST
B)INPUT MODE
</> : Position
p
p
/
: Character
DVD ->
DVD
C)INPUT RENAME
