PLAYBACK
➤
Listening to FM/AM radio
En
63
You can tune into a radio station by specifying its frequency or
selecting from registered radio stations.
• The radio frequencies differ depending on the country or region where the unit is
being used. The explanation of this section uses a display with frequencies used
in Australia model.
• If you cannot obtain good reception on the radio, adjust the direction of the FM/AM
antennas.
Selecting a frequency for reception
1
Press TUNER to select “TUNER” as the input
source.
2
Press BAND to select a band (FM or AM).
3
Use the following keys to set a frequency.
TUNING:
Increase/decrease the frequency. Hold down the
key for about a second to search stations automatically.
Numeric keys:
Enter a frequency directly. For example, to
select 98.50 MHz, press “9”, “8”, “5” and “0” (or ENT).
“TUNED” lights up when a signal is received from a radio
station.
“STEREO” also lights up when a stereo signal is received.
• “Wrong Station!” appears when you enter a frequency that is out of
reception range.
• You can switch between “Stereo” (stereo) and “Mono” (monaural) for FM
radio reception in “FM Mode” (p.96) in the “Option” menu. When the signal
reception for an FM radio station is unstable, switching to monaural may
improve it.
Listening to FM/AM radio
OUT 1
IN
OUT 2
VOLUME
MUTE
DRC
ADAPTIVE
3
ZONE
2
SBL
PL
SBR
SB
PR
SW1
SL
SW2
SW
SR
PL
C
L
R PR
STEREO
SLEEP
HD
TUNED PRE AMP PARTY
ZONE
3
ZONE
4
HD
TAG
DOCK
F M 8 7 . 5 0 M H z
S
BL
S
BR
S
B
S
L
S
W
S
R
C
L
R
VOLUME
TUNED
S
TEREO
F M 9 8 . 5 0 M H z
TUNING
BAND
TUNER
Numeric keys
