CONFIGURATIONS
➤
Configuring various functions (Setup menu)
En
81
Speaker
Configures the speaker settings manually.
■
Configuration
Configures the output characteristics of the speakers.
• When you configure the speaker size, select “Large” if the woofer diameter of your speaker is 16 cm
(6-1/4”) or larger or “Small” if it is smaller than 16 cm (6-1/4”).
❑
Power Amp Assign
Selects a speaker system.
In addition to the 5.1-channel speaker system, various speaker configurations are
possible using the Zone2 speakers or bi-amp connection.
Settings
❑
Subwoofer
Selects whether or not a subwoofer is connected.
Settings
❑
Front
Selects the size of the front speakers.
Settings
• “Front” is automatically set to “Large” when “Subwoofer” is set to “None”.
❑
Center
Selects whether or not a center speaker is connected and its size.
Settings
Basic (default)
Select this option when you use a normal speaker system (not using
Zone2 speakers or a bi-amp connection).
BI-AMP
Select this option when you connect front speakers that support
bi-amp connections (p.17).
Zone2
Select this option when you use Zone2 speakers (p.70) in addition to
the speaker system in the main zone.
S e t u p
S p e a k e r
H D M I
S o u n d
E C O
F u n c t i o n
N e t w o r k
L a n g u a g e
C o n f i g u r a t i o n
D i s t a n c e
L e v e l
E q u a l i z e r
T e s t T o n e
Use (default)
Select this option when a subwoofer is connected.
The subwoofer will produce LFE (low-frequency effect) channel audio
and low-frequency components from other channels.
None
Select this option when no subwoofer is connected.
The front speakers will produce LFE (low-frequency effect) channel
audio and low-frequency components from other channels.
Small (default)
Select this option for small speakers.
The subwoofer will produce front channel low-frequency components
(configurable in “Crossover”).
Large
Select this option for large speakers.
The front speakers will produce all of the front channel frequency
components.
Small (default)
Select this option for small speakers.
The subwoofer or front speakers will produce center channel
low-frequency components (configurable in “Crossover”).
Large
Select this option for large speakers.
The center speaker will produce all of the center channel frequency
components.
None
Select this option when no center speaker is connected.
The front speakers will produce center channel audio.
RX-S600_S600D_om.book Page 81 Tuesday, May 28, 2013 1:36 PM
