En
9
1
Preparation
Confirming package contents
Preparing cables
The following cables (not supplied) are required to build the system described
in this document.
• Speaker cables (depending on the number of speakers)
• Audio pin cable (x1)
• HDMI cables (x3)
• Network cable (x1) (when connecting to a router via a network cable)
Remote control
Batteries (AAA, R03, UM-4)
(x2)
AM antenna
(RX-V485/HTR-4072)
FM antenna (RX-V485/HTR-4072)
Quick Start Guide (this booklet)
YPAO microphone
One of the above is supplied
depending on the region of purchase.
DAB/FM antenna (RX-D485)