Yamaha RX-A3000, Руководство пользователя

Страница: 118 / 201

En
118
SETUP
Setting various functions (Setup menu)
Extra Bass
Allows the front channel low-frequency components to be
produced exclusively by the subwoofer, or by both the subwoofer
and the front speakers.
Distance
Adjusts the timing at which the speakers produce audio so that
sounds from the speakers reach the listening position at the same
time.
Selecting adjustment units
Use
i
Cursor
B
/
C
to select the unit for distance (meters or
feet), and press
i
ENTER .
Setting distances for each speaker
Use
i
Cursor
B
/
C
to select the speaker you want to configure,
and press
i
ENTER
.
Then use
i
Cursor
D
/
E
to set the distance from the speaker to
your listening position.
Level
Separately adjusts the volume of each speaker.
Use
i
Cursor
B
/
C
to select the desired speaker, and press
i
ENTER .
Then use
i
Cursor
D
/
E
to adjust the volume for the selected
speaker.
Parametric EQ
Adjusts sound quality of tone using a parametric equalizer.
PEQ Select
Select an equalizer type.
PEQ Data Copy
Select 1 of the 3 parametric equalizer types acquired with automatic
setup and manually copy that information to the manual adjustments.
Off (Default) Depending on the size of the front speakers, either the
front speakers or the subwoofer produce the front
channel low-frequency components.
On
The subwoofer and the front speakers produce the
front channel low-frequency components.
When “Subwoofer1” and “Subwoofer2” are set to “None” or
“Front” is set to “Small,” “Extra Bass” is disabled.
Adjustable range 1.0 ft. to 80.0 ft. (0.30 m to 24.00 m)
Default setting 10.0 ft. (3.00 m)
Adjustment
increments
0.2 ft. (0.05 m)
Adjustable range -10.0 dB to +10.0 dB
Default setting 0.0 dB
Adjustment
increments
0.5 dB
You can also adjust the volume of each speaker by using
B
LEVEL .
Press
B
LEVEL and use
i
Cursor
B
/
C
to select the desired
speaker. Then use
i
Cursor
B
/
C
to adjust the volume for the
selected speaker.
Manual
Manually adjust equalizer sound.
Flat
Adjust individual speakers to achieve the same
characteristics. Select this option if speakers offer the
same quality.
Front
Adjust individual speakers to achieve the same
characteristics as the front left and right speakers.
Select this option if front left and right speakers offer
significantly greater quality than other speakers.
Natural Adjust all speakers to achieve a natural sound. Select
this if high-frequency sounds seem too strong when
“PEQ Select” is set to “Flat.”
Through
(Default) Disable the equalizer.
Flat Manual Copy the “Flat” parametric equalizer information
acquired with automatic setup.
Front Manual Copy the “Front” parametric equalizer information
acquired with automatic setup.
Natural Manual Copy the “Natural” parametric equalizer information
acquired with automatic setup.