Yamaha RX-A1000, Руководство пользователя

Страница: 138 / 184

SETUP
Enjoying the contents in another room
En
138
Controlling Zone2
The remote control can be used to select and control
Zone2 devices. The available operations are as follows:
•
Selecting the input source of Zone2.
•
Tuning into FM or AM when “TUNER” is selected as the
input source of Zone2.
•
Tuning into SIRIUS Satellite Radio when “SIRIUS” is
selected as the input source of Zone2.
•
Adjust the volume of Zone2 devices (when connected via
the built-in amplifier).
■
Activating the Zone2 operation
mode
Set
b
MAIN/ZONE2
to ZONE2 before attempting to
use the remote control to control Zone2 devices.
■
Operating Zone2
To enable and disable the audio output to Zone2
Press
q
RECEIVER
A
.
To select an input source for Zone2
Press
d
Input selector .
To use SCENE function for Zone2
Press and hold
i
SCENE
key for about 3 seconds to
register the current setting to the scene.
Press
i
SCENE
key to load the registered setting.
To enable the sleep timer for Zone2
Automatically switch the Zone2 device to standby mode
after a specified period of time has elapsed (sleep timer).
Press
g
SLEEP repeatedly to specify a time for the
sleep timer function.
■
Adjusting Zone2 high-/low-
frequency sound (Tone Control)
1
Press ZONE CONTROLS on the front panel.
2
Press TONE/BALANCE on the front panel
repeatedly to select “Treble” or “Bass.”
3
Press PROGRAM
l
/
h
to adjust the output
level in the applicable frequency range.
The display returns to the previous display soon after the
key is released.
■
Adjusting Zone2 front speaker
balance
1
Press ZONE CONTROLS on the front panel.
2
Press TONE/BALANCE on the front panel
repeatedly to select “Balance.”
3
Press PROGRAM
l
/
h
to adjust balance.
The display returns to the previous display soon after
the key is released.
Enjoying the music in all rooms
Use this feature to play main zone sources in Zone2
simultaneously. This feature is useful when you want to
play back main sources as background music in a home
party, etc. When using the party mode, set “Party Mode
Set” to “Enable” (
☞
p. 118 ).
Press
h
PARTY to turn on or off the party mode.
“Party Mode On” or “Party Mode Off” appears on the
front panel display or the TV screen.
While this unit is in the party mode, the PARTY
indicators turn on in the front panel display.
b
MAIN/ZONE2
d
Input selector
g
SLEEP
h
PARTY
i
SCENE
q
RECEIVER
A
SCENE
SLEEP
AUDIO
7 5
PARTY
MAIN ZONE 2
DOCK
1 2 3 4
6 V-AUX
USB NET
TUNER SIRIUS PHONO
1 2 3 4
BD/DVD TV CD RADIO
1 2 3 4
BD/DVD TV CD RADIO
VOLUME
MUTE
ENTER
7 8 5 6
9 0 10
1 2 3 4
REC
ENT
TOP
MENU
POP-UP
MENU
SOURCE RECEIVER
CODE SET
INPUT
MUTE
ENHANCER SUR. DECODE
STRAIGHT PURE DIRECT
MOVIE MUSIC
FM
INFO MEMORY
AM
PRESET
HDMI OUT
AV
1 2 3 4
CATEGORY
TUN./CH
ON SCREEN OPTION
RETURN
DISPLAY
q
h
g
d
MULTI
b
i
Only the following sources are available for
the Zone2.
AV1-4 (only analog audio input), V-AUX (only
analog audio input), AUDIO1-4 (only analog audio
input), PHONO, USB, NET, DOCK, TUNER,
SIRIUS
The following settings can be registered
for each scene of the Zone2.
Input, Master Volume, Tone Control
Adjustable range -10.0 dB to +10.0 dB
Adjustment
increments
2.0 dB
120min. 90min.
60min. 30min. Off
• Input audio signals are mixed down to 2ch Stereo and
output at the analog ZONE2 OUT jacks.
• Party mode can be turned on only when the power of
main zone is turned on.
• Party mode automatically turns off when the power of
main zone is turned off.