Yamaha RX-A1000, Руководство пользователя

Страница: 129 / 184

SETUP
Extended functionality that can be configured as needed (Advanced Setup menu)
En
129
Avoiding crossing remote control
signals when using multiple
Yamaha receivers
The remote control of the unit can only receive signals
from a receiver which has an identical ID (remote
control ID). When using multiple Yamaha AV receivers,
you can set each remote control with a unique remote
control ID for its corresponding receiver.
On the contrary, if you are setting the same remote
control ID for all receivers, you can use one remote
control to operate 2 receivers.
Resetting the SIRIUS Satellite
Radio™ parental lock code
Reset the SIRIUS Satellite Radio parental lock code to
the factory default setting. If you forget the code, it can
be reset.
Changing TV format
Change the color encoding format of OSD to PAL or
NTSC (default), to match the format used by the TV
connected via the HDMI OUT 1-2 or VIDEO
(MONITOR OUT) jack.
m
Numeric keys
o
CODE SET
p
SOURCE/RECEIVER
7 8 5 6
9 0
1 2 3 4
SOURCE RECEIVER
CODE SET
SCENE
VOLUME
ENHANCER SUR. DECODE
STRAIGHT SLEEP PURE DIRECT
AV
AUDIO
1 2 3 4
7 5
FM
INFO MEMORY
AM
PRESET
PARTY
MOVIE MUSIC
MUTE
ENTER
10
REC
ENT
TOP
MENU
POP-UP
MENU
MAIN ZONE 2
INPUT
MUTE
DOCK
HDMI OUT
MULTI
1 2 3 4
6 V-AUX
USB NET
TUNER SIRIUS PHONO
CATEGORY
TUN./CH
ON SCREEN OPTION
1 1 2 2 3 3 4 4
BD/DVD BD/DVD TV TV CD CD RADIO RADIO
RETURN
DISPLAY
p
o
m
ID1
(Default) Receives the remote control signals set in
ID1.
ID2
Receives the remote control signals set in
ID2.
ID1 is set for both remote control and receiver by
default. To avoid crossing remote control, change the
remote control ID for both remote control and
receiver.
R E M O T E C O N A M P
I D 1
■
To change the remote control ID
1
Press
o
CODE SET using a pointed
object such as the tip of a ballpoint pen.
2
Press
p
SOURCE/RECEIVER .
3
Enter the desired remote control ID code.
To switch to ID1:
Enter “5019” using
m
Numeric keys .
To switch to ID2:
Enter “5020” using
m
Numeric keys .
Once the remote control code is registered
successfully
p
SOURCE/RECEIVER will blink
twice.
Perform each of the following steps within
1 minute. Settings will be automatically stopped if
more than 1 minute passes since the last operation.
To reset, repeat from step 1.
SOURCE
RECEIVER
MAIN ZONE 2
CODE SET
AV
1 2 3 4
Registration successful: blinks twice
Registration failed: blinks 6 times
•
If setup fails, repeat from step 1.
•
Returns to ID1 after the remote control code is
initialized (
☞
p. 127 ).
RESET
Resets the code to the factory default
setting.
CANCEL
(Default) Cancels resetting of the parental lock
code.
S I R I U S P I N
C A N C E L
T V F O R M A T
N T S C