background image

Natural Sound Stereo Receiver

80W + 80W (8

) RMS Output Power, 0.019% THD, 20–20,000 Hz

High Dynamic Power, Low Impedance Drive Capability

Continuously Variable Loudness Control

CD DIRECT AMP Switch to Reproduce the Purest CD Sound

PURE DIRECT Switch to Reproduce the Purest Source Sound

40-Station Random Access Preset Tuning

Automatic Preset Tuning

Preset Station Shifting Capability (Preset Editing)

IF Count Direct PLL Synthesizer Tuning System

Video Signal Input/Output Capability

Remote Control Capability

Thank you for selecting this YAMAHA stereo receiver.

CONTENTS

Safety Instructions  ................... 2
Supplied Accessories  .............. 3
Connections ............................. 4
Basic Operations ...................... 7
Tuning Operations .................. 10
Preset Tuning  ......................... 11
Remote Control Transmitter  ... 13
Troubleshooting ...................... 15
Specifications ......................... 16

IMPORTANT!
Please record the serial number of this
unit in the space below.

Serial No.:

The serial number is located on the rear
of the unit.
Retain this Owner’s Manual in a safe
place for future reference.

WARNING
TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE
THIS UNIT TO RAIN OR MOISTURE.

R I S K   O F   E L E C T R I C

S H O C K

CAUTION:  TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK), NO USER-SERVICEABLE

PARTS INSIDE, REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead
symbol, within an equilateral triangle,
is intended to alert you to the
presence of uninsulated “dangerous
voltage” within the product’s
enclosure that may be of sufficient
magnitude to constitute a risk of
electric shock to persons.

The exclamation point within an
equilateral triangle is intended to alert
you to the presence of important
operating and maintenance
(servicing)  instructions in the
literature accompanying the
appliance.

• Explanation of Graphical Symbols

CAUTION

OWNER’S MANUAL

RX-595

Содержание RX-595

















Отзывы: