Yamaha RSio64-D, Руководство пользователя

Страница: 8 / 30

8
Owner’s Manual
Introduction
Introduction
Thank you for choosing the Yamaha RSio64-D audio
interface.
To take full advantage of the superior functions and
performance offered by the RSio64-D, and to enjoy years of
trouble-free use, be sure to read this owner’s manual
carefully before operation.
Features
The RSio64-D is an interface that can be used as a router
and format converter between Dante and Mini-YGDAI
cards.
This allows Mini-YGDAI cards that support a wide variety
of input/output formats and processing to be connected to
a Dante network, meeting the needs of various types of
systems including broadcast, live, recording, and post-
production. In addition, the settings of the RSio64-D can
be fully controlled from a CL or QL series console.
• A wide variety of Mini-YGDAI cards can be used,
including processing cards as well as input/output cards.
• Each MY slot provides an SRC (Sampling Rate
Converter) to allow digital connection between differing
word clock routes.
• Seven different widely usable routing patterns are preset,
including routing between Mini-YGDAI cards. Matrix
patching from R Remote V3 or a CL/QL console.
• EXT DC INPUT supports redundant power supplies.
• Dante redundancy (primary/secondary) is supported.
NOTE
Before yo u install Mini-YGDAI cards in slots 1–4, yo u m u st
check the Yamaha w e b site to determine w hether the card is
compati b le w ith the RSio64-D, and to v erify the total n u m b er
of Yamaha or third-party cards that can b e installed in
com b ination w ith that card.
Yamaha w e b site:
http:// www .yamahaproa u dio.com/
Precautions for Rack
Mounting
This unit is rated for operation at ambient temperatures
ranging from 0 to 40 degrees Celsius. When mounting the
unit with other RSio unit(s) or other device(s) in an EIA
standard equipment rack, internal temperatures can
exceed the specified upper limit, resulting in impaired
performance or failure. When rack mounting the unit,
always observe the following requirements to avoid heat
buildup:
• When mounting the unit in a rack with devices such as
power amplifiers that generate a significant amount of
heat, leave more than 1U of space between the RSio and
other equipment. Also either leave the open spaces
uncovered or install appropriate ventilating panels to
minimize the possibility of heat buildup.
• To ensure sufficient airflow, leave the rear of the rack
open and position it at least 10 centimeters from walls or
other surfaces. If you’ve installed a fan kit, there may be
cases in which closing the rear of the rack will produce a
greater cooling effect. Refer to the rack and/or fan unit
manual for details.
Firmware Updates
This product enables you to update the unit firmware to
improve operations, add functions, and correct possible
malfunctions. The following two types of firmware are
available for the unit:
• Unit’s firmware
• Dante module firmware
Firmware updates are performed from R Remote V3.
Details on updating the firmware are available on the
following website:
http://www.yamahaproaudio.com/
For information on updating the unit, refer to the firmware
update guide available on the website.
NOTE
It is necessary to u pdate other de v ices depending on the
v ersion of each de v ice in the Dante net w ork. For details,
refer to the firm w are compati b ility a v aila b le on the Yamaha
w e b site.
http:// www .yamahaproa u dio.com/