Yamaha RS90NL, Дополнительное руководство по обслуживанию

Страница: 133 / 156

129
SPEC
CABLE ROUTING
K
Face the ends of the clamp
upward.
L
Install the fuel tank breather hose
onto the breather pipe until it
contacts the running board sup-
port.
M
To the speed sensor
N
60 ~ 70 mm (2.4 ~ 2.8 in)
O
Route the float chamber air vent
hoses behind the battery
bracket.
P
Ground lead
Q
To the oil tank
R
To the parking brake
S
To the brake caliper
T
Brake hose
U
Fasten the wire harness with the
plastic band. The buckle and the
end of the plastic band should
not be between the wire harness
and the shroud.
V
Fasten the wire harness and fuel
tank breather hose together with
the holder. The open ends of the
holder should face inward.
W
Fuel hoses
X
Fasten the wire harness and fuel
tank breather hose together with
the holder. The open ends of the
holder should face upward.
Y
Place the end of the plastic band
between the frame cross mem-
ber and fuel tank.