Yamaha RS7000 Ver.1.2 Скачать руководство пользователя страница 17

Страница: 17 / 352

The Controls & Connectors

RS7000

MODE Buttons

Select the main RS7000 operating mode. The indicator

above the selected MODE button will light.

[PATTERN] Button (Page 70)

Selects the PATTERN mode. The PATTERN Play and
PATTERN Patch modes are selected alternately each time
the button is pressed.

[PATT CHAIN] Button (Page158)

Selects the PATTERN CHAIN mode.

[SONG] Button (Page180)

Selects the SONG mode.

[UTILITY] Button (Page256)

Selects the UTILITY mode. After entering the UTILITY
mode the [UTILITY] button sequentially selects the vari-
ous pages provided.

SUB MODE Buttons

These buttons access the various sub modes available

within each of the main modes. When a sub mode includes

more than on display page, the pages are sequentially

selected each time the button is pressed.

[GROOVE] Button

Selects the GROOVE quantize sub mode.

[PLAY FX] Button

Selects the PLAY FX sub mode and the various display
pages provided.

[MIDI DELAY] Button

Selects the MIDI DELAY sub mode and the various dis-
play pages provided.

[MIXER] Button

Selects the MIXER sub mode and the various display
pages provided.

[VOICE EDIT] Button

Selects the VOICE EDIT sub mode and the various display
pages provided.

[EFFECT] Button

Selects the EFFECT sub mode and the various display
pages provided.

[SETUP] Button

Selects the SETUP sub mode and the various display
pages provided.

[MASTER] Button

Selects the MASTER sub mode and the various display
pages provided.

[SAVE] Button

Selects the SAVE sub mode and the various display pages
provided.

[LOAD] Button

Selects the LOAD sub mode and the various display pages
provided.

[JOB] Button

Selects the PATTERN, PATTERN CHAIN, or SONG JOB
sub mode and the various display pages provided.

[EDIT] Button

Selects the PATTERN, PATTERN CHAIN, or SONG
EDIT sub mode and the various display pages provided.

[EXIT] Button

Moves backward (upward) through the sub mode display

pages, or out of the current sub mode back to the main

mode.

MODE

PATTERN

SONG

UTILITY

PATT

CHAIN

[PATTERN] Button

[SONG] Button

[PATT CHAIN] Button

[UTILITY] Button

ENTER

SUB MODE

GROOVE

PLAY FX

MIDI DELAY

MIXER

VOICE EDIT

EFFECT

SETUP

MASTER

SAVE

LOAD

JOB

EDIT

Содержание RS7000 Ver.1.2

































































































































































































































































































































































Результаты поиска

Содержание RS7000 Ver.1.2

Отзывы:

Похожие инструкции для RS7000 Ver.1.2

Бренды по названию

Популярные бренды

Yamaha RS7000 Ver.1.2, Руководство пользователя

Результаты поиска

Содержание RS7000 Ver.1.2

Отзывы:

Похожие инструкции для RS7000 Ver.1.2

Бренды по названию

Популярные бренды