Yamaha RS VENTURE 2014 Скачать руководство пользователя | Manualshive

Страница: 72 / 102

background image

Periodic maintenance and adjustment

64

8.

Install the top cover, the right side cover,
and the shroud.

ESU14572

V-belt

WARNING

EWS00403



Coming in contact with the rotating V-
belt or clutch parts can cause severe in-
jury or death. Never run the engine with
the drive guard removed.



Make sure that the drive guard is in-
stalled securely before operating the
snowmobile to protect against severe
injury or death from a broken V-belt or
other part should it come off the snow-
mobile while it is in operation.

NOTICE

ECS00831

Never run the engine with the V-belt re-
moved. Clutch components can be dam-
aged.

The V-belt should be checked before each
ride.

To check the V-belt

1.

Remove the shroud and the left side cov-
er, and then remove the drive guard. (See
page 23 for drive guard removal proce-
dures.)

2.

Check the V-belt for wear and damage.
Replace if necessary.

3.

Install the drive guard, and then install
the left side cover and the shroud.

To replace and adjust the V-belt

WARNING

EWS00412

When installing a new V-belt, make sure
that it is positioned properly. Otherwise,
the V-belt clutch engagement speed will
be changed and the snowmobile may
move unexpectedly when the engine is
started, which could cause an accident.

NOTICE

ECS00512

As the V-belt wears, the position of the V-
belt will change. If the V-belt position is
out of specification, it must be adjusted to
ensure proper clutch performance.
Have a Yamaha dealer make this adjust-
ment.

1.

Place the snowmobile on a level surface
and apply the parking brake.

2.

Remove the shroud and the left side cov-
er, and then remove the drive guard. (See
page 23 for drive guard removal proce-
dures.)

3.

Remove the screws and the bolts, and
then pull the left lower cover outward to
remove it.

1. V-belt wear limit

New V-belt width:

34.5 mm (1.36 in)

V-belt wear limit width:

32.5 mm (1.28 in)

U8HXS3E0.book Page 64 Wednesday, April 2, 2014 2:44 PM

«
...
70
71
72
73
74
...
»

Содержание RS VENTURE 2014







































































































Отзывы:

Нет отзывов

Похожие инструкции для RS VENTURE 2014

Бренд: Yamaha Страницы: 156

Бренд: Yamaha Страницы: 411

Бренд: Yamaha Страницы: 102

Formula 500 1998

Бренд: Ski-Doo Страницы: 398

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды