Yamaha RS VENTURE 2014 Скачать руководство пользователя | Manualshive

Страница: 27 / 102

background image

Control functions

19

If the warning indicator and the warning light
go off, the engine oil level is sufficient, how-
ever it is getting low. Add engine oil as soon
as possible.
If the warning indicator and the warning light
do not go off, check the engine oil level in the
oil tank (see page 58 for engine oil level
checking procedures), and add engine oil if
necessary.
If the warning indicator and the warning light
still remain on, have a Yamaha dealer check
the snowmobile.

Oil pressure warning

The warning indicator comes on and “OP-
LO” (oil pressure low) appears in the odome-
ter display if the engine oil pressure is low
when the engine is started. At the same time,
the engine speed is limited to less than the
clutch engagement speed until the warning
indicator goes off.
If the engine oil pressure remains low for one
minute, the engine stops. If this occurs, have
a Yamaha dealer check the snowmobile.

TIP

If there is no engine oil in the oil passages
when the engine is started, such as after the
engine oil is changed, the warning indicator
may come on and “OP-LO” may appear in
the odometer display for a few seconds until

the oil circulates through the engine. The
snowmobile can be operated normally after
the warning indicator goes off.

ESU10514

Coolant temperature warning
indicator “ ”

If the engine overheats, the coolant tempera-
ture warning indicator and the warning light
come on. When this occurs, stop the engine
immediately and allow the engine to cool
down, and then check the coolant level in the
coolant reservoir. (See page 62 for checking
procedures.)

NOTICE

ECS00042

Do not continue to operate the engine if it
is overheating.

ESU13813

Electric power steering warn-
ing indicator “EPS”

The electric power steering warning indicator
comes on when the key is turned to the on
position, and then goes off once the engine is
started. If the warning indicator remains on or
comes on after the engine is started, the EPS
system may not be working correctly. When
this occurs, have a Yamaha dealer check the
EPS system.

1. Oil level/pressure warning indicator “

”

2. “OP-LO” (oil pressure low)

1

2

1. Coolant temperature warning

indicator “

”

2. Warning light “

”

U8HXS3E0.book Page 19 Wednesday, April 2, 2014 2:44 PM

«
...
25
26
27
28
29
...
»

Содержание RS VENTURE 2014







































































































Отзывы:

Нет отзывов

Похожие инструкции для RS VENTURE 2014

Бренд: Alfa Romeo Страницы: 294

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды