Yamaha RCX222, Руководство пользователя

Страница: 217 / 524

4-118 4-119
Chapter
4
OPERA
TION
11. "MANUAL" mode
11.5.1 Editing shift coordinates
[Procedure]
1) In the "MANUAL>SHIFT" mode, select a shift coordinate number with the cursor (
↑
/
↓
)
keys.
2) Press (EDIT) to enter "MANUAL>SHIFT>EDIT" mode.
3) Use the cursor (
←
/
→
) key to move the cursor to the position you want to change.
4) Use to , , , and to enter the shift coordinate data.
Enter a space to separate between the data for x and y. The data input formats are as
follows.
• To enter the data in Cartesian coordinates ("mm" units)
Enter a number consisting of an integer portion of up to 5 digits and having 2 or
less places below the decimal point.
±###.##, ±####.#, ±#####.
n
NOTE
Enter point data for both X-axis and Y-axis. If omitted, "0" will be
automatically entered for that axis.
■
Editing shift coordinate data
MANUAL >SHIFT>EDIT 50% [MG][S1H0X]
————————————x———————y———————z———————r———
S0 = 0.00 0.00 0.00 0.00
0.00 0.00
0.00 0.00
0.00
S1 = 300.00 0.00
S2 = 300.00 -300.00
S3 = 0.00 0.00 0.00
[POS] 600.00 0.00 0.00 0.00
UNDO
5) Press , cursor up/down (
↑
/
↓
) keys or page up/down ( , ) keys to
finish the data input.
Press if you want to cancel the data input.
6) To continue the editing, repeat steps 3) to 5).