Yamaha RCX222, Руководство пользователя

Страница: 152 / 524

4-54
Chapter
4
OPERA
TION
4-55
10. "PROGRAM" mode
10.2 Program editing
[Procedure]
1) Press (EDIT) in "PROGRAM" mode.
A cursor appears on the top line of a program listing as shown below, allowing
program editing.
2) Use the cursor keys to move the cursor to the position to be edited and enter a
program command with the RPB.
A maximum of 75 characters can be entered on one line.
n
NOTE
Program editing is finished when any of , up/down cursor (
↑
/
↓
)
keys, page up/down ( / ) keys, or is pressed during
program editing.
A maximum of 9999 lines can be written in one program as long as the
program size is within about 98 Kbytes.
■
"PROGRAM>EDIT" mode
PROGRAM
>EDIT
<TEST2 >
1 ’***** TEST2 PROGRAM *****
2 GOSUB *SUBPROG
3 DO2(0)=0
4 WAIT DI3(4,3,2)=3
5 MOVE P,P0
’ORIGIN
SELECT COPY CUT PASTE BS
———————————————————————————————————————————
1 2 3
Pressing finishes the program input for one line and moves the cursor to
the beginning of the next line.
3) When program editing is complete, press .