Yamaha RCX222, Руководство пользователя

Страница: 147 / 524

4-48 4-49
Chapter
4
OPERA
TION
9. "AUTO" mode
9.9.2 Deleting break points
Break points can be deleted. Press (SEARCH) as needed to find a break point that
was set.
[Procedure]
1) Use the cursor (
↑
/
↓
) keys to select the line number where the break point is set.
2) Press (CANCEL).
The "
B
" mark disappears and the break point is canceled.
3) To find the line number on which another break point was set, press (SEARCH).
This function makes it easier to find a break point that you want to delete.
n
NOTE
• Up to 4 break points can be set in one program. These 4 break points
cannot set in different programs. However, when there is "COMMON"
program, 4 break points can be set including the main program. (For
more information on the COMMON program, refer to the programming
manual.)
• If the program is compiled or edited, all the break points are deleted.
• Break points are ignored during execution of STEP or NEXT. However,
break points set in sub-routines are enabled when executing NEXT.