Yamaha RACK, Справочное руководство

Страница: 73 / 103

Configuration screens
Reference Manual
TF Series
- 73 -
OUTPUT screen
Allows you to configure how output channels will be output. The buttons displayed vary
depending on the type of output channel selected.
○
: Displayed
– : Not displayed
1
ST button
Determines whether the stereo channel is output or not.
2
SUB button (V3.0 and later)
Determines whether the channel's signal is sent (on) or not sent (off) to the SUB bus.
3
SUB slider (V3.0 and later)
Determines the amount of signal sent from the selected channel to the SUB bus.
4
Out Gain text box
Allows you to adjust the output gain.
When selected, you can use the [TOUCH AND TURN] knob to adjust the setting. Touch
again to display the keyboard and enter a value.
5 Φ
(phase) button
Allows you to reverse the phase.
When turned on, the output signal's phase is reversed.
6
OMNI OUT button
Displays the number of the OMNI OUT to which the channel is directed.
Up to two numbers can be displayed. For three or more numbers, "+" is displayed.
Displays the OMNI OUT screen. (

page 22 )
For information about channels and output ports, see "Quick Config Input and input
channel relationships" (

page 91 ).
7
Recall Safe button (V1.1 and later)
Turns recall safe on and off for the corresponding channel.
You can display the RECALL SAFE screen by touching the jump button in the right corner
of the Recall Safe button.
Output channel
Buttons
ST button
SUB button
SUB slider
Out Gain
Buttons
Φ
button
OMNI OUT
Indicator
OMNI OUT
Buttons
AUX 1–8 – –
○ ○ ○ ○
AUX9/10–AUX19/20
○ ○ ○ ○ ○ ○
SUB – –
○ ○ ○ ○
STEREO – –
○ ○ ○ ○
MATRIX1–4 – –
○ ○ ○ ○
ձ
ղ
ճ
շ մ
ն յ