Yamaha RACK Скачать руководство пользователя страница 47 | Manualshive

Страница: 47 / 103

background image

Configuration screens

Reference Manual

TF Series

- 47 -

4

Level meter

Displays the gain adjusted level.

5

Digital gain text box

Allows you to adjust the digital gain. It is set to 0 dB by default. You can touch the text
box to highlight it, then use the [TOUCH AND TURN] knob to adjust the setting. You
can also touch the text box again to adjust the setting using the keyboard screen.

6

Φ

(phase) button

Allows you to reverse the phase.
When turned on, the input signal's phase is reversed.

7

Gain slider

When the INPUT button is selected, the slider adjusts the analog gain of the head amp.
The PAD (-24 dB) will be switched on or off when the analog gain is adjusted between
+17 dB and +18 dB.
When the USB button is selected, the slider adjusts digital gain.

8

+48V button

Turns phantom power (+48 V) to the head amp on and off.

On

: Phantom power is turned on.

Off

: Phantom power is turned off.

When the USB button is selected, the +48V button is not displayed.

9

Gain Unlink button (V1.1 and later)

Displayed for stereo channels and for channels that have stereo link turned on.
While you are touching the button, gain for the left and right channels can temporarily
be adjusted individually. When you release the button, the gain for both channels can
be adjusted together but the difference in gain between the two channels is maintained.

NOTICE

Information about phantom power

When phantom power is not needed, set the +48V button to the off position.
Observe the following when using phantom power to prevent damage to the console or connected
devices, and signal noise.
• Do not set the +48V button to the on position when the device connected to the input jack does

not require phantom power.

• Do not connect or disconnect cables when the +48V button is set to the on position.
• Before turning phantom power on or off for a channel, first set the channel's volume to the

minimum level.

NOTE

When using phantom power, noise may be generated if there is a difference in the impedance between
the hot and cold of the device connected to an input jack.

Setting stereo link and the input source

1.

Display the INPUT screen. (

2.

Touch the stereo link selection button that
corresponds to the desired setting.

3.

Touch the input selection button that
corresponds to the desired setting.

4.

Use the gain slider to adjust the
head amp gain.

Adjust the gain slider so that the center of
the GainFinder lights up.

5.

Touch the digital gain text box to highlight
it, then use the [TOUCH AND TURN] knob to
adjust the setting.

Gain finder level display

Gain slider

Digital gain
text boxes

«
...
45
46
47
48
49
...
»

Содержание RACK








































































































Отзывы:

Нет отзывов

Похожие инструкции для RACK

Бренд: Keeley Страницы: 12

Бренд: Daktronics Страницы: 4

Balde Descarga 300

Бренд: Altrad Страницы: 13

Бренд: Continental Electric Страницы: 8

Бренд: Vongon Страницы: 17

Бренд: Valcom Страницы: 11

Бренд: RCF Страницы: 2

Бренд: Fantini Rubinetti Страницы: 16

Бренд: Doyon Страницы: 21

Бренд: YORKVILLE Страницы: 20

Бренд: Feelworld Страницы: 35

ST. LOUIS MINIMIX

Бренд: Cimo Страницы: 10

Бренд: GTC Страницы: 91

Бренд: Kogan Страницы: 8

KHM3WH - Hand Mixer

Бренд: KitchenAid Страницы: 3

Бренд: Samson Страницы: 24

Бренд: Acoustic Control Страницы: 2

Бренд: SoundCraft Страницы: 199

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды