Yamaha R6 YZF600, Руководство пользователя

Страница: 56 / 112

Operation an d important ri d in g points
6-3
6
3. Open the throttle gradually, and at
the same time, release the clutch
lever slowly.
4. After starting out, close the throt-
tle, and at the same time, quickly
pull the clutch lever in.
5. Shift the transmission into second
gear. (Make sure not to shift the
transmission into the neutral posi-
tion.)
6. Open the throttle part way and
gradually release the clutch lever.
7. Follow the same procedure when
shifting to the next higher gear.
EAU85380
To d ecelerate
1. Release the throttle and apply
both the front and the rear brakes
smoothly to slow the motorcycle.
2. As the vehicle decelerates, shift to
a lower gear.
3. When the engine is about to stall
or runs roughly, pull the clutch le-
ver in, use the brakes to slow the
motorcycle, and continue to
downshift as necessary.
4. Once the motorcycle has
stopped, the transmission can be
shifted into the neutral position.
The neutral indicator light should
come on and then the clutch lever
can be released.
WARNING
EWA17380

Improper b rakin g can cause
loss of control or traction. Al-
ways use
b oth b rakes an d apply
them smoothly.

Make sure that the motorcycle
an
d the en g ine have sufficiently
slowe d b efore shiftin g to a low-
er g ear. En g a g in g a lower g ear
when the vehicle or en g ine
spee d is too hi g h coul d make
the rear wheel lose traction or
the en
g ine to over-rev. This
coul d cause loss of control, an
acci d ent an d injury. It coul d also
cause en g ine or d rive train d am-
a g e.
EAU16811
Tips for re d ucin g fuel con-
sumption
Fuel consumption depends largely on
your riding style. Consider the follow-
ing tips to reduce fuel consumption:

Shift up swiftly, and avoid high en-
gine speeds during acceleration.

Do not rev the engine while shift-
ing down, and avoid high engine
speeds with no load on the en-
gine.

Turn the engine off instead of let-
ting it idle for an extended length
of time (e.g., in traffic jams, at traf-
fic lights or at railroad crossings).
UBN6E2E0.book Page 3 Friday, December 7, 2018 2:56 PM