Yamaha R6 YZF600, Руководство пользователя

Страница: 55 / 112

Operation an d important ri d in g points
6-2
6
NOTICE
ECA24110
If a warnin g or in d icator li g ht d oes
not work as d escri b e d a b ove, have a
Yamaha d ealer check the vehicle.
3. Shift the transmission into neutral.
4. Push the start switch “
” to crank
the engine with the starter.
Release the start switch when the
engine starts, or after 5 seconds.
Wait 10 seconds before pressing
the switch again to allow battery
voltage to restore.
NOTICE
ECA11043
For maximum en g ine life, never ac-
celerate har d when the en g ine is
col d !
EAU77401
Shiftin g
Shifting gears lets you control the
amount of engine power available for
starting off, accelerating, climbing hills,
etc. The gear positions are shown in
the illustration.
TIP

To shift the transmission into the
neutral position (
), press the
shift pedal down repeatedly until it
reaches the end of its travel, and
then slightly raise it.

This model is equipped with a
quick shift system. (See page 3-4.)
NOTICE
ECA23990

Even with the transmission in
the neutral position,
d o not
coast for lon g perio d s of time
with the en g ine off, an d d o not
tow the motorcycle for lon g d is-
tances. The transmission is
properly lu
b ricate d only when
the en g ine is runnin g . Ina d e-
quate lu b rication may d ama g e
the transmission.

Except when upshiftin g with the
quick shift system, always use
the clutch while chan
g in g g ears
to avoi d d ama g in g the en g ine,
transmission, an d d rive train,
which are not d esi g ne d to with-
stan d the shock of force d shift-
in g .
EAU85370
To start out an d accelerate
1. Pull the clutch lever to disengage
the clutch.
2. Shift the transmission into first
gear. The neutral indicator light
should go out.
1. Gear positions
2. Shift pedal
2
1
1
N
2
3
4
5
6
UBN6E2E0.book Page 2 Friday, December 7, 2018 2:56 PM