Yamaha R1 Series 2015, Руководство по обслуживанию

Страница: 376 / 704

GENERATOR
5-35
EAS20134
GENERATOR
Removing the stator coil and generator rotor
*
Following the tightening order, loosen the bolt one by one, and then retighten it to the specific torque.
Order Job/Parts to remove Q’ty Remarks
Engine oil
Drain.
Refer to “CHANGING THE ENGINE OIL” on
page 3-30.
1 Stator coil coupler 1 Disconnect.
2 Crankshaft position sensor coupler 1 Disconnect.
3 Generator cover 1
4 Generator cover gasket 1
5 Dowel pin 2
6 Stator coil lead holder 1
7
Stator coil assembly (stator coil/crankshaft posi-
tion sensor)
1
8 Shaft 1
9 Generator rotor 1
10 Woodruff key 1
11 Crankshaft end cover 1
12 Timing mark accessing bolt 1
E
LT
6 Nm (0.6 m
•
kgf, 4.3 ft
•
Ibf)
85 Nm (8.5 m
•
kgf, 61 ft
•
lbf)
10 Nm (1.0 m
•
kgf, 7.2 ft
•
lbf)
15 Nm (1.5 m
•
kgf, 11 ft
•
lbf)
10 Nm (1.0 m
•
kgf, 7.2 ft
•
lbf)
1 2
3
4
5
6
7
8
9
10
11
12
(8)
5
LT
LT
6 Nm (0.6 m
•
kgf, 4.3 ft
•
Ibf)
3.0 Nm (0.30 m
•
kgf, 2.2 ft
•
Ibf)
1st
T.R
.
2nd Specified angle 90°
15 Nm (1.5 m
•
kgf, 11 ft
•
lbf)
FWD FWD