Yamaha R-S700BL Скачать руководство пользователя страница 57

Страница: 57 / 71

TROUBLESHOOTING

ADDITION

IN
FO
RMA

IO
N

■

SIRIUS Satellite Radio

The following messages may be displayed on the front panel display in certain situations.

Message

Status/Cause

Remedy

See

page

ANTENNA ERROR

The antenna is not connected to the
SiriusConnect tuner properly.

Check the connection of the antenna and
SiriusConnect tuner.

SIRIUS LOADING

This unit is communicating with the
SiriusConnect tuner.

The message disappears normally within several tens
of seconds.

—

CHECK SR TUNER

The SiriusConnect tuner is not connected
to the SIRIUS jack of this unit correctly.

Check the connection of the SiriusConnect tuner and
this unit.

The SiriusConnect tuner is not connected
to the AC wall outlet.

Connect the power cable of the SiriusConnect tuner
to the AC wall outlet.

—

NOT SUPPORTED

This unit does not support the connected
SIRIUS Satellite Radio tuner.

Connect the SiriusConnect tuner that this unit
supports,

—

ACQUIRING

The signal is too weak.

Adjust the orientation of the antenna of the
SiriusConnect tuner. Check the antenna reception
level from the Antenna information on the front
panel display.

UPDATING

The SiriusConnect tuner is updating the
channel list.

Wait until the updating is complete.

—

The period of the subscription is end.

Contact SIRIUS Satellite Radio to renew the
subscription.

—

F/W UPDATING

The SiriusConnect tuner is updating the
firmware.

Wait until the updating is complete.

—

CALL SIRIUS
(CALL 888-539-
SIRIUS TO
SUBSCRIBE)

The selected channel is not subscribed.

Contact SIRIUS Satellite Radio to subscribe the
selected channel.
URL: https://activate.siriusradio.com/
Phone: 1-888-539-SIRIUS (1-888-539-7474)

—

Select another channel.

SUB UPDATED

The subscription information is updated.

—

INVALID

The selected channel is currently out of
service.

Select another channel.

NOT AVAILABLE

The operation you made is not available.

—

Содержание R-S700BL








































































Результаты поиска

Содержание R-S700BL

Отзывы:

Похожие инструкции для R-S700BL

Бренды по названию

Популярные бренды

Yamaha R-S700BL, Руководство пользователя

Результаты поиска

Содержание R-S700BL

Отзывы:

Похожие инструкции для R-S700BL

Бренды по названию

Популярные бренды