CONTROLS AND FUNCTIONS
6
En
■
Common controls
The following parts and controls can be used no matter
which input source is selected.
1
Infrared si
g
nal transmitter
Sends infrared signals.
2
A
(power)
Turns this unit on, or sets it to standby mode.
3
SLEEP
Sets the sleep timer (see page 12).
4
Input selector buttons
Select the input source you want to listen to.
y
The input source names correspond to the names of the
connection jacks on the rear panel.
5
TREBLE –/+
Increases or decreases the high frequency response.
Control range: –10 dB to +10 dB
6
BASS –/+
Increases or decreases the low frequency response.
Control range: –10 dB to +10 dB
7
BALANCE L/R
Adjusts the sound output balance of the left and right
speakers to compensate for sound imbalances.
Control range:
8
/
/
/
/ ENTER
Selects and confirms items in the Option menu
(see page 30).
9
MENU
Turns the Option menu on and off (see page 30).
0
/–
Increases or decreases the sound output level.
A
SPEAKERS A/B
Turns on or off the speaker set connected to the
SPEAKERS A and/or SPEAKERS B terminals on the
rear panel each time the corresponding button is
pressed (see page 12).
B
DIMMER
Select the brightness level of the front panel display
from 3 levels by pressing this button repeatedly.
y
• This setting is retained even if you turn off this unit.
• The default setting is the brightest.
C
MUTE
Mutes the sound output. Press again to restore the
sound output to the previous volume level.
Remote control
SLEEP
LINE 1
CD
TUNER
TUNING
PRESET
TREBLE
SPEAKERS
B
A
R
BASS
MENU
DIMMER
MUTE
VOLUME
DISC SKIP
BALANCE
BLUETOOTH
ENTER
MEMORY
INFO
BAND
LINE 2
LINE 3
1
2
3
9
B
C
E
A
4
5
6
0
7
8
D
(+20 dB)
(center)
(+20 dB)
The opposite side of
channel is muted.
The opposite side of
channel is muted.
