Yamaha QY700, Руководство пользователя, Страница: 77 / 334

76 Chapter 2. SONG MODE
■
If you do not want to use fingered chording:
1. Set the fingered-chord switch to OFF. (See Section 7.,
below.)
2. Move the cursor to the chord root/type area on the
screen.
3. Select the root by pressing a microkeyboard key from
E2 to D
#
3.
4. Select the type by pressing a key from E3 to F4.
5. To set an on-bass : Hold down the left-side
d
[OCT
DOWN] key and press a key from E2 to D
#
3.
To set an original bass : Hold down the left-side
u
[OCT UP] key and press a key from E3 to F4.
6. Press
e
to register your entry.
■
If you want to use fingered chording:
1. Go to UTILITY mode and set up the fingered-chord
zone. (
→
p.299)
2. Return to the SONG PLAY screen. Move the cursor to
the fingered-chord switch area, and set the value to
FINGRD (see Section 7 below).
Leave the cursor in this area as you proceed.
3. Press down the keys for the appropriate chord, using
either the QY700 microkeyboard or a remote MIDI key-
board. Be sure that all the keys you press are within
the fingered-chord zone. The QY700 will automatically
detect and register the root and type values.
• To select the on-bass or original bass value: Continue to
hold down the chord notes within the fingered-chord zone,
while pressing one note (for the on-bass setting) or multi-
ple notes (for the original-bass setting) in the keyboard area
to the left of the zone.
• For information about how to enter chords, refer to Chapter
1. (
→
p.42)
7. Fingered-chord switch
• This setting enables or disables the fingered-chord feature.
• If you enable this feature (by setting the value to FINGRD),
you will be able to enter chord values directly by playing
the appropriate chord either at the microkeyboard or at a
remote MIDI keyboard. Specifically, you can enter the root
and type by playing the keys within the keyboard’s fingered-
chord zone (
→
p.299), and you can enter the on-bass or
original-bass value by playing the appropriate key(s) in the
area to the left of the zone. See the procedure given in Sec-
tion 6., directly above.
• For general information about the fingered chord feature,
refer to Chapter 1. (
→
p.42)
0101
1101
OFF, FINGRD
1. Move the cursor to the fingered-chord switch area.
2. Use the data dial or
n
/
y
to select the setting.
• You can use the fingered-chord feature to set up an auto-
accompaniment for live-action keyboard play. First set the
fingered-chord switch to FINGRD, and then select an empty
song. You can then play the chord notes (for the accompa-
niment) in the fingered-zone area (
→
p.299), while using
the area to the right of the zone for normal play. The QY700
will produce your performance in the keyboard track’s cur-
rent voice. (But note that the area to the left of the zone is
not available.)
1. SONG PLAY
F
#
E F G A B C
D
M
add9
M7
add9
a
m
mM7
m6
c
C
#
D
#
7(
#
5)
7(
b
5)
7(
#
9)
7sus4
sus4
SECTION
A
G
b
D
b
E
b
7(
b
9)
m7
(
b
5)
M7(9)
6
6(9)
7
7(9) m7
(9)
m7
dim
Z W V
/
H G F
U T S R Q P O
#
N
C B A
?
M L K
_ ! S % &
E
)
D
(
_
Y X
aug
7(
b
13)
7 (13) 7(
#
11)
J I
m7(11)
c
G
#
A
b
A
#
B
b
B C D E F G H
Enter the chord root here. Enter the chord type here.