Yamaha QY700, Руководство пользователя, Страница: 65 / 334

64
BASIC CONCEPTS
Chapter 1
8. Enter notes.
• Press microkeyboard to enter notes.
• A line of a length corresponding to the length of the speci-
fied note will appear, and the song position pointer will move
to the right.
• In this example, press the middle “D” microkeyboard (D3).
9. Enter a tie.
• The note to be entered next is connected to the following
note by a tie.
(1) Set the note value to a 16th note, and enter an “E” (E3).
(2) Set the note value to an 8th note, and press
s
(TIE).
The note length will be extended by an 8th note, and the
song position pointer will move.
■
Repeat steps 6 through 9, and enter all the notes of
track 1.
10. Press
s
to stop recording.
• Press
p
to playback.
Deleting a mistakenly-entered note
• To delete the note that was entered immediately before, press
5
(BkDelete). The note that was entered will disap-
pear, and the song position pointer will move back, allow-
ing you to re-enter the note.
• To delete any undesired note, move the cursor to the note
that you wish to delete, and press
6
(Delete). All notes
located at the same timing will be deleted.
Using Jobs
• In track 1, measures 3 – 10 are identical to measures 23 –
30. In such cases, you can use the Song job Copy Event for
more efficient data entry.
(1) Press
s
to stop Step Recording.
(2) Press
j
to access the Job menu.
(3) Use the data dial,
n
/
y
, the cursor keys, or the numeric
keypad to select “11 Copy Event” and press
e
to access
the Copy Event job.
(4) Set the upper line to Song 01, TR=01, M003:1 – 010:4, the
lower line to Song 01, TR=01, M 023
×
1, and press
e
.
Now let’s playback.
• Press the sequencer key
p
to playback the song.
• Make sure that the performance of track 1 is correct.
the same "C" note
Note that was entered
Song position pointer