Yamaha QY700, Руководство пользователя, Страница: 292 / 334

291 Chapter 6. UTILITY MODE
6
2. MIDI
• With a setting of MTC:MIDI-A or MTC:MIDI-B, the
QY700 will synchronize to MTC messages received from
MIDI IN-A or MIDI IN-B, and will transmit MMC mes-
sages from the corresponding MIDI OUT connector (MIDI
OUT-A for MTC:MIDI-A, or MIDI OUT-B for MTC:MIDI-
B).
• MTC is an acronym for MIDI Time Code, and is a type of
timecode that can be exchanged between MIDI device via a
MIDI cable. MTC consists of “hour:minute:second:frame”
units.
The QY700 does not output MTC. If you wish to synchro-
nize using MTC, you will need a device that is able to out-
put MTC such as the Yamaha MD4.
• MMC is an acronym for MIDI Machine Control, and is a
specification for controlling devices such as multi-track re-
corders from MIDI sequencers etc. When operations such
as start/stop or rewind/fast-forward are performed on the
sequencer, the corresponding operation will automatically
be performed on the MMC-compatible multi-track recorder,
so that playback on the recorder will always occur from the
same location of the song as on the sequencer.
• Select this setting if you are using the QY700 as a slave
device for MTC synchronization, or if you are using the
QY700 together with an external device such as an MMC-
compatible multi-track recorder.
0101
1101
Internal, MIDI-A, MIDI-B, MTC:MIDI-A, MTC:MIDI-B
2. MIDI
• The MIDI page lets you make MIDI settings for the QY700.
1. Press
u
.
▼
The indicator located above
u
will light, and you
will enter Utility mode.
2. Press
2
(MIDI) to access the MIDI page.
3. Move the cursor to the parameter that you wish to set.
4. Use
n
/
y
, the data dial, or numeric keypad
→
e
to set the value.
1. MIDI sync
• This selects whether the QY700 will use its own internal
clock or whether it will use MIDI Clock or MTC messages
received from the MIDI IN connector.
• You will need to make these settings when synchronizing
the QY700 with external MIDI devices.
• With a setting of Internal, the QY700 will use its own inter-
nal clock. Select this setting if you are using the QY700 by
itself or as the master device in a system that is synchro-
nized by MIDI Clock messages.
• With a setting of MIDI-A or MIDI-B, the QY700 will be
controlled by MIDI Clock messages received from MIDI
IN-A or MIDI IN-B. Select this setting if you are using the
QY700 as a slave device for synchronized play.
This is the setting to use when synchronizing the QY700 to
an external MIDI device.
F1 F2 F3 F4 F5 F6
1Ê
System
2Ê
MIDI
3Ê
MIDI filter
4Ê
Sequencer
5Ê
Click
6Ê
Fingered chord zone
u