manualshive.com logo in svg

Yamaha QY700, Руководство пользователя, Страница: 291 / 334

Поделиться
Скачать
Yamaha QY700 Скачать руководство пользователя страница 291

290

Chapter 6. UTILITY MODE

3. Footswitch

•

This sets the function of the footswitch connected to the
rear panel FOOT SW connector.

0101
1101

Start/Stop, Section, Sustain, Sostenuto

Start/Stop

Each time the footswitch is pressed, the song
or pattern will alternately start or stop.

Section

Each time the footswitch is pressed, the Sec-
tion of the pattern will be switched in the or-
der of A – H.

Sustain

All notes played while the footswitch is held
will be sustained until the footswitch is re-
leased.

Sostenuto

All notes which were being held on the key-
board when the footswitch was pressed will
be sustained until the footswitch is released.

4. Pitch bend wheel, Assignable wheel

•

 These settings specify the MIDI messages that are output
when the PITCH wheel and ASSIGNABLE wheel located
on the QY700’s top panel are operated.

•

Since the PITCH wheel will automatically return to the
center position when it is released, it is suitable for control-
ling Pitch Bend.

•

The ASSIGNABLE wheel is detented in the center posi-
tion.

0101
1101

OFF, P.B., Ctrl#001␣ – 119, CAT, VEL, TMP

OFF

The wheel will have no function.

P.B. (Pitch Bend)

Pitch Bend messages.

Ctrl#001 (Modulation) – 119 (ContrlChng)

Control Change messages. You can choose the control
number. However, Ctrl#032 cannot be selected.

CAT (Ch After)

Channel aftertouch messages

VEL (Velocity)

Velocity

TMP (Tempo)

Tempo

1. System

Содержание QY700















































































































































































































































































































































Отзывы:

Нет отзывов