Yamaha QY700, Руководство пользователя, Страница: 203 / 334

202 Chapter 5. PATTERN MODE
1. Style number and name
2. Section, and pattern name
• Each pattern exists as a section within a style. You select the
pattern by selecting the style (by number: 01 to 64) and
section (by letter: A to H). The QY700 displays the corre-
sponding style and section names next to your entries. If
you select an empty style or section, the QY700 displays a
blank string (********) in the name area.
• You can use the Pattern Name job to set or edit the style and
section names. Explanation of pattern jobs begins on page
256.
• For general information about styles and sections, refer to
page 39.
0101
1101
Style number
01,...,64
Section
A,...,H
1. Move the cursor to the style-number or section-letter
entry area.
2. Enter the appropriate value using the data dial,
n
/
y
, or the numeric keypad
→
e
.
• For the section letter, you can also make your selection by
pressing one of the first eight keys on the microkeyboard
(section keys “A” to “H”: the section letter appears under
the key).
• If you change the style or section setting while playback is
in progress, the QY700 will change the sound at the begin-
ning of the next measure.
3. Section connection
• This setting sets up automatic section switching. If the
QY700 encounters this section during SONG replay, it plays
the section once and then automatically switches into the
section indicated at the right of the arrow (unless explicitly
instructed otherwise by a PATTERN-track entry).
• Note that the setting operates only during playback under
SONG mode. Automatic pattern switching does not occur
while you are working in PATTERN mode.
• If the setting is A
→
B, for example, then if the QY700
encounters section A during song playback, it plays the sec-
tion once and then proceeds to Section B (of the same style).
If the setting is A
→
A, then the QY700 continues to repeat
section A until instructed otherwise.
• A connection value of corresponds to “end of playback.”
If the setting is A
→
, then upon encountering section A
the QY700 will play it once and then terminate the song
play.
0101
1101
A,...,H, (= end)
1. Move the cursor to the section-connection setting (the
entry to the right of the arrow).
2. Enter the appropriate value using the data dial,
n
/
y
, or the microkeyboard.
1. PATCH
E F G A B C
D
M
add9
SECTION A
c
B C D E F G H