Input channels
Reference Manual
37
Channel name display indication
In SENDS ON FADER mode, ON/OFF is indicated for the channel.
On the PREFERENCE page in the USER SETUP pop-up window, the channel number is
shown if NAME DISPLAY is set to “NAME ONLY”.
Correcting delay between channels (Input Delay)
This section explains how to correct delay between input channels by using the Input Delay
function.
This function is useful when you want to correct the phase variance caused by microphone
locations on the stage, to add depth to the sound by using phase variance, or to correct a
delay (a time gap) that may exist between video and audio that are sent from a site for
broadcast on TV.
INPUT DELAY window (8ch)
You can set the on/off status and the value of the input channel delay.
1
DELAY SCALE button
Press the button to display the DELAY SCALE window, in which you can select the unit
for the delay time.
There are five delay scales: meter (meter/sec), feet (feet/sec), sample (number of
samples), ms (milliseconds), and frame (frames). If you select frame as the units, you can
choose from six frame rates: 30, 30D, 29.97, 29.97D, 25, and 24. In this case, fr will
appear as the units in the channel name display.
STEP
1.
Press the Bank Select keys in the Fader Bank section and the [SEL] keys on the top
panel to select the input channel.
2.
Press the INPUT DELAY field in the SELECTED CHANNEL VIEW screen.
3.
Use the [TOUCH AND TURN] knob to set the delay.
4.
Press the DELAY ON button.
CHANNEL ON
CHANNEL OFF
Channel number
display
SELECTED CHANNEL VIEW screen
INPUT DELAY screen
1
6
2
4
3
5
