Input and output patching
Reference Manual
22
DIRECT OUT screen (8ch)
1
DIRECT OUT ON button
Switches the Direct Out on or off. The currently-selected Direct Out point is indicated
above the button.
2
DIRECT OUT PATCH button
Displays the currently-selected Direct Out output port. Press this button to open the
PORT SELECT window, in which you can select an output port.
3
DIRECT OUT LEVEL knob
Indicates the output level of the Direct Out. You can use the [TOUCH AND TURN] knob
to adjust the level.
4
Close button
Closes the screen.
PORT SELECT window
Displayed when you press the DIRECT OUT PATCH button in the one-channel or the eight-
channel INSERT/DIRECT OUT window. Set the output port used for direct output.
1
Category select list
Selects the category of output port. The categories correspond to the following output
ports. The displayed categories vary depending on the channel type.
•
OUTPUT/DIGITAL/REC
.........OMNI OUT1–OMNI OUT16 (QL5), OMNI OUT1–OMNI
OUT8 (QL1), DIGITAL OUT L/R, RECORDER IN(L/R)
•
SLOT1
....................................SLOT1(1)–SLOT1(16)
•
SLOT2
....................................SLOT2(1)–SLOT2(16)
•
DANTE1–32
...........................DANTE1–DANTE32
•
DANTE33–64
.........................DANTE33–DANTE64 (QL5 only)
2
Output port select buttons
Assign the output port used for direct output of the currently-selected INPUT channel.
3
CLOSE button
Closes the window.
1
2
3
4
1
2
3
