Setup
Reference Manual
210
Copying and pasting a file
Follow the steps below to copy a desired file into buffer memory, and then paste it with a
different file name.
NOTE
You cannot use a file name that already exists when you paste a file.
Deleting a file
NOTE
You cannot delete a protected file.
Creating a directory
NOTE
You cannot create a directory using a directory name that already exists.
Formatting a USB flash drive
Follow the steps below to format a USB flash drive.
A USB flash drive with a capacity of 4GB or larger will be formatted in FAT32, and a USB flash
drive with a capacity of 2GB or smaller will be formatted in FAT16.
STEP
1.
Turn the [TOUCH AND TURN] knob to select the copy-source file, and press the
COPY button in the SAVE/LOAD window.
2.
Press the directory icon or press the arrow button in the PATH field to move to the
directory into which you want to paste the file.
3.
Press the PASTE button.
4.
Enter the file name, and press the PASTE button.
STEP
1.
Turn the [TOUCH AND TURN] knob to select a file to delete, then press the DELETE
button in the SAVE/LOAD window.
2.
To execute the Delete operation, press the OK button.
STEP
1.
Press the directory icon or press the arrow button in the PATH field in the SAVE/
LOAD window to change the directory.
2.
Press the MAKE DIR button.
3.
Enter the name of the directory you want to create, then press the MAKE button.
STEP
1.
In the Function Access Area, press the SETUP button.
2.
In the SETUP screen, press the SAVE/LOAD button.
3.
In the SAVE/LOAD window, press the FORMAT button.
4.
Enter a volume name, and press the FORMAT button.
5.
To execute the Format operation, press the OK button.
SAVE/LOAD window
