Input and output patching
Reference Manual
17
PATCH/NAME screen
1
PATCH button
Indicates the port that is patched to the output channel. If you press this button when
another tab is active, a window will appear, enabling you to select the network and port.
2
Channel select button
Selects the channel to set.
NOTE
Switching channels on this screen will not affect the channel selection on the console.
3
Channel icon button
Indicates the icon and color that are currently selected for the corresponding channel.
When you press this button, a screen will appear in which you can select an icon or
sample name.
4
Channel number display box
Indicates the channel number. This item cannot be changed.
5
Channel name input box
Indicates the name that is assigned to the corresponding channel. When you press this
field, a keyboard window allowing you to assign a name will appear.
6
Category select list
Select the type of port.
7
Port select buttons
From the category, these buttons let you select the port to patch. To cancel the
selection, press the button once again.
8
Tabs
Enable you to switch between items.
9
Close button
Closes the screen.
Selecting the output channel for each output port
NOTE
If PATCH CONFIRMATION in the PREFERENCE tab on the USER SETUP screen is ON, a
confirmation dialog box will appear when you attempt to change the patch settings. If STEAL
PATCH CONFIRMATION is ON, a confirmation dialog box will appear when you attempt to
change a location that is already patched elsewhere.
3
5
4
1
9
6
7
2
8
STEP
1.
In the Function Access Area, press the SETUP button.
2.
Press the OUTPUT PORT button in the SYSTEM SETUP field located in the center of
the SETUP screen.
3.
In the tabs below the OUTPUT PORT screen, select the output port you want to
control.
4.
Press the channel select button of the port you want to operate.
5.
Use the category select list and the channel select buttons to select the send-source
channel.
SETUP screen
OUTPUT PORT screen
