Yamaha PZ50FXW, Руководство пользователя

Страница: 24 / 104

5-5
NOTE:
@
● To switch the speedometer, odometer, and tripmeter
displays between kilometers and miles, select the
odometer mode “ODO”, and then push the “SELECT”
button for at least 10 seconds while the snowmobile
is stopped.
● Use the engine speed meter only when checking the
snowmobile and performing basic maintenance. The
engine speed meter should not be used while riding
the snowmobile since the reading will vary from the
actual engine speed.
@
ESU00363
High beam indicator light
The high beam indicator light 1 comes on when the high
beams of the headlights are switched on. (See page 5-11
for headlight beam switch operation.)
ESU05390
Fuel meter and grip/thumb warmer level indicator
The fuel meter and grip/thumb warmer level indicator 1
have eight segments which show the amount of fuel
remaining in the fuel tank, or show the grip warmer, or
the thumb warmer level.
Fuel meter
As the fuel level decreases in the fuel tank, the segments
disappear until the level goes down to the last segment
“E” (Empty). When this occurs, the fuel level warning
indicator
2 and the warning light 3 come on.
If the fuel level warning indicator and the warning light
come on, fill the fuel tank at the first opportunity.
NOTE:
@
The snowmobile must be stopped on a level surface to
obtain an accurate fuel meter reading, since the reading
changes according to the movement and inclination of
the snowmobile.
@
E_8gk.book Page 5 Friday, June 16, 2006 9:53 AM