Panel Operation
— CONFIG WIZARD screen (Basic mode)
21
PX10/PX8/PX5/PX3 Reference Manual
HPF (high pass filter)
(If “SP SERIES” is “GENERIC”)
Selects the cutoff frequency of the HPF. Common to both channels A and B.
LPF (low pass filter)
(If “AMP MODE” is “SUB
+
SUB” and “SP SERIES” is “GENERIC”)
Selects the cutoff frequency of the LPF. Common to both channels A and B.
X-OVER (crossover)
(If “AMP MODE” is “FULL
+
SUB” and “SP SERIES” is “GENERIC”)
Selects the crossover frequency of the full-range speaker and subwoofer.
CONFIRMATION
Applies the set value.
After confirming the setting is appropriate, press the main knob to actually apply the set
value.
To correct the setting, press the [
] (back) key to return to the screen to be corrected.
To cancel the setting, press the [MENU] key or press and hold the [
] (back) key until a
confirmation screen appears.
NOTE
In Basic mode, the
is fixed to 24 dB/Oct., Butterworth type.
NOTE
In Basic mode, the
is fixed to 24 dB/Oct., Butterworth type.
NOTE
In Basic mode, the
is fixed to 24 dB/Oct., Linkwitz Riley type.
