Yamaha PW50J, Руководство пользователя

Страница: 27 / 80

Instrument an d control functions
4-2
4
TIP
The adjusting range of the speed limit-
er screw is from the fully turned-in po-
sition to 7 mm (0.28 in) turned out.
When the screw is turned out to 7 mm
(0.28 in), the throttle grip can only be
opened approximately halfway. If more
power is required, please consult a
Yamaha dealer.
WARNING
EWA14632
Improper a d justment of the spee d
limiter coul d cause improper throttle
operation. You coul d lose control,
have an acci d ent or b e injure d . Do
not turn the a d justin g screw out
more than 7 mm (0.28 in) b efore con-
sultin g a Yamaha d ealer. Always
make sure the throttle g rip free play
is a d juste d to 1.5–3.5 mm (0.06–0.14
in). (See pa g e 7-14.)
Power re d uction plate
Once the rider can operate with skill at
the top speed permitted by adjusting
the speed limiter alone, the power re-
duction plate can be removed. (See
page 7-7.)
EAU12902
Front b rake lever
The front brake lever is located on the
right side of the handlebar. To apply
the front brake, pull this lever toward
the throttle grip.
1. No more than 7 mm (0.28 in)
1
1. Front brake lever
1
U2SA84E0.book Page 2 Wednesday, May 10, 2017 9:37 AM