54
PSR-SX900/SX700 Owner’s Manual
You can memorize your original panel settings (mainly Style, Voices, and Multi Pads) to a
One Touch Setting (OTS). The newly created One Touch Setting will be saved in the User
drive or a USB flash drive as a Style, and you can call up the One Touch Setting as a part of
the Style.
1
Select the desired Style to memorize your One Touch Setting.
2
Make the desired panel settings, such as those for Voices and
Effects.
3
Press the [MEMORY] button in the REGISTRATION MEMORY
section.
A message appears. However, you do not need to make any settings here, since the
On/Off settings in this display do not affect the One Touch Setting function.
4
Press the desired ONE TOUCH SETTING [1]–[4] button to which
you wish to memorize your panel settings.
A message appears prompting you to save the panel settings at this time. To go on
and memorize various panel settings to other buttons, touch [No], and then repeat
steps 2–4 as necessary, finally saving all your new settings in Step 5 below.
5
Touch [Yes] to call up the Style Selection display for saving your
data, and then save the current settings as a User Style.
For instructions on saving, refer to “File Management” (page 33).
Memorizing Original Panel Settings to One Touch Setting
For information on which panel settings
are memorized to One Touch Setting,
refer to “Parameter Chart” in the Data
List on the website (page 9).
NOTE
For OTS buttons to which your panel
settings have not been memorized, the
OTS settings of the original Style will
be maintained.
NOTE
The memorized One Touch Set-
ting will be lost if you change the
Style or turn the power off without
carrying out the Save operation.
NOTICE
Содержание PSR-SX900
Страница 130: ...130 PSR SX900 SX700 Owner s Manual...
Страница 135: ......