Yamaha PSR-SX600, Справочное руководство

Страница: 89 / 115

PSR-SX600 Reference Manual
89
8
Mix
e
r
Editin g and Savin g Your Ori g inal Effect Type
1
In the Type Select display in the previous section, press one of the [8

] (Detail)
buttons to call up the display for editin g the effect parameters.
2
Use the [2

]–[4

] buttons to select a parameter then use the [5

]/[6

]
buttons to edit the value.
When Reverb, Chorus, or DSP1 is selected as the Effect Block, you can adjust the Return Level via the
[7

] (Effect Return Level) button.
3
Press the [8

] (Save) button to call up the display for the Save operation.
4
Use the [2

]–[5

] buttons to select the destination for savin g the settin g s as a
User Effect.
If necessary, change the User Effect name. Press the [6

] (Rename) button to call up the Character
Entry window, enter the name, and then press the [8

] (OK) button.
5
Press the [8

] (OK) button to carry out the Save operation.
6
Press the [EXIT] button to return to the previous display.
The saved User Effect can be selected from the “User” category of the corresponding Effect Block
(
page 88 ).
4