PSR-S975/S775 Reference Manual
79
5
Multi P
a
ds
Multi Pad—Step Recording via MIDI
Step Recording can be carried out in the EDIT page. After selecting a Multi Pad in step 4 on
the TAB [
F
] button to select the EDIT page.
The EDIT page indicates the Event list, which lets you record notes with absolutely precise timing. This Step
Recording procedure is essentially the same as that for Song Recording (
), with the exception of
the points listed below:
• There is no LCD button for selecting channels, since Multi Pads contain data for only a single channel.
• In the Multi Pad Creator, only channel events and System Exclusive messages can be entered. Chord and
Lyrics events are not available. You can switch between the two types of Event Lists by pressing the [F] but-
ton.
You can manage (rename, copy, paste and delete) your created Multi Pad Bank and each of the Multi Pads
belonging to the Bank. For instructions on managing the Multi Pad Bank file, refer to “Basic Operations” in
the Owner’s Manual. This section covers how to manage each Multi Pad.
1
Select the Multi Pad Bank containing the Multi Pad to be edited.
Press the MULTI PAD CONTROL [SELECT] button to call up the Multi Pad Bank Selection display, use
the TAB [
E
][
F
] buttons to call up “PRESET,” “USER” or “USB” (when USB flash drive is connected),
then use the [A]–[J] buttons to select the desired Multi Pad Bank.
NOTE
If you select a Preset Multi Pad Bank then edit the Multi Pads, save your edits to “USER” or “USB” (when USB flash drive is connected) as a User Bank.
2
Press the [7
] (EDIT) button of MENU 1 to call up the MULTI PAD EDIT display.
3
Select a particular Multi Pad to be edited by pressing any of the [A], [B], [F] and [G]
buttons.
4
Edit the selected Pad.
Editing Multi Pads
[1
]
NAME
Changes the name of each Multi Pad.
[3
]
COPY
Copies the Multi Pad(s). See below.
[4
]
PASTE
Pastes the Multi Pad(s) copied by the [3
] button.
[5
]
DELETE
Deletes the selected Multi Pads.