Yamaha PSR-S950, Руководство пользователя

Страница: 89 / 110

PSR-S950/S750 Owner’s Manual
89
Co
nnec
ti
ons – Usin
g Y
our In
stru
ment
wi
th Oth
er
D
e
vi
ces –
10
You can connect a stereo system to amplify the instrument’s sound by using the
OUTPUT [L/L+R]/[R] jacks. When using the PSR-S950, the microphone or guitar
sound connected to the instrument’s [MIC/LINE IN] jack is output at the same time.
When these are connected, you can use the instrument’s [MASTER VOLUME] dial
to adjust the volume of the sound output to the external device.
You can connect the headphone jack of a portable audio player to the instrument’s
[AUX IN] jack, letting you hear the sound of that portable audio player through the
built-in speakers of the instrument.
Connecting Audio Devices (OUTPUT [L/L+R]/[R] jacks, [AUX IN] jack)
NOTE
Use audio cables and adaptor plugs
having no (zero) resistance.
NOTE
Use only the [L/L+R] jack for connec-
tion with a monaural device.
NOTICE
When the instrument’s sound is
output to an external device, first
turn on the power to the instru-
ment, then to the external
device. Reverse this order when
you turn the power off. Other-
wise, damage to the instrument
and external device may occur.
Because this instrument’s power
may automatically be turned off
due to the Auto Power Off func-
tion (page 15), turn off the power
to the external device, or disable
the Auto Power Off when you do
not intend to operate the instru-
ment for a while.
NOTICE
Do not route the output from the
[OUTPUT] jacks to the [AUX IN]
jack. If you make this connec-
tion, the signal input at the [AUX
IN] jack is output from the [OUT-
PUT] jacks. These connections
could result in a feedback loop
that will make normal perfor-
mance impossible, and may
even damage the equipment.
Using an External Stereo System for Playback
Phone plug
(standard)
Audio cable
Phone plug
(standard)
Input jack
Powered speaker
Playing a Portable Audio Player with the Built-in Speakers
NOTICE
When the sound of an external
device is output to the instru-
ment, first turn on the power to
the external device, then to the
instrument. Reverse this order
when you turn the power off.
Otherwise, damage to the instru-
ment and external device may
occur.
NOTE
The instrument’s [MASTER VOLUME]
setting affects the input signal from the
[AUX IN] jack.
Stereo mini plug
Audio cable
Stereo mini plug
Headphone jack
Portable audio
player