PSR-S950/S750 Owner’s Manual
81
R
e
gi
str
a
tio
n
Memor
y –
Sa
vi
ng and
R
e
c
a
lli
n
g Cust
o
m
P
ane
l Se
tups –
7
The saved Registration Memory Bank files can be recalled by using the REGIST
BANK [-]/[+] buttons or the following procedure.
1
Press the REGIST BANK [+] and [-] buttons simultaneously to
call up the REGISTRATION BANK Selection Display.
2
Press one of the [A] – [J] buttons to select a Bank.
You can also use the REGIST BANK [-]/[+] buttons, or the [DATA ENTRY]
dial and the [ENTER] button to select a Bank.
3
Press one of the green-lit numbered buttons ([1] – [8]) in the
Registration Memory section.
Recalling a Registered Panel Setup
NOTE
When recalling the setups including
file selection of Song, Style, text, etc.
from a USB flash memory, make sure
that the appropriate USB flash memory
including the registered Song/Style is
connected into the [USB TO DEVICE]
terminal.
NOTE
Turning the [FREEZE] button on dis-
ables recall of specific item(s). To use
this function, you need to select the
item(s) not to be recalled by accessing
[FUNCTION]
[E] REGIST
SEQUENCE/FREEZE/VOICE SET
TAB [
E
][
F
] FREEZE.
Confirming the Registration Memory Information
You can call up the information display to confirm which Voices and Style are memorized to the [1] – [8] buttons
of a Registration Memory Bank.
1.
Simultaneously press the REGIST BANK [+] and [-] buttons to call up the Registration Bank Selection dis-
play, then use the [A] – [J] buttons to select the desired Bank.
2.
Press the [7
] (INFO.) button to call up the information display.
By using the TAB [
E
][
F
] buttons, you can switch between the two information display pages: information
for the Registration Memory [1] – [4] buttons and information for the [5] – [8] buttons.
3.
Press the [F] (CLOSE) button to close the information display.
NOTE
If a certain Voice part is set to off, the Voice name for corresponding part is shown in gray (on the PSR-S950); on the PSR-S750, the Voice part name for
the corresponding part is shown in gray.
3
NOTE
If a certain Voice part is set to off, the Voice name for corresponding part is shown in gray (on the PSR-S950); on the PSR-S750, the Voice part name for
the corresponding part is shown in gray.
Advanced Features
Refer to the Reference Manual on the website,
Chapter 7
.
Disabling recall of specific items:
[FUNCTION]
[E] REGIST SEQUENCE/FREEZE/VOICE
SET
TAB [
E
][
F
] FREEZE
Calling up Registration
Memory numbers in order:
[FUNCTION]
[E] REGIST SEQUENCE/FREEZE/VOICE
SET
TAB [
E
][
F
] REGISTRATION SEQUENCE
Содержание PSR-S950
Страница 103: ...PSR S950 S750 Owner s Manual 103 Index...
Страница 104: ......
Страница 109: ...PSR S950 S750 Owner s Manual 109...
