46
PSR-S975/S775 Reference Manual
2
St
yles
Editing the Rhythm Part of a Style (Drum Setup)
The Drum Setup function allows you to edit the rhythm part of the current Style, such as changing the drum
instruments and make various settings. The procedure below applies to step 5 in the Basic Procedure on
1
From the BASIC page, while holding down the [F] (REC CHANNEL) button, press the
[1
] or [2
] button to select the desired channel to be edited.
NOTE
If the different drum sounds are assigned to each section of the selected channel, the sounds are set to that of the current section in order to use the Drum
Setup function.
2
Press the [G] (DRUM SETUP) button to call up the DRUM SETUP window.
3
If necessary, press the STYLE CONTROL [START/STOP] button to start playback of
the rhythm part.
The sounds played back are indicated on the display keyboard, letting you to check the note to edit.
4
Use the [1
]/[2
] (NOTE) buttons to select the note to edit.
NOTE
You can also select the note by pressing the note on the keyboard.
5
Select the desired instrument to be used.
5-1
Use the [3
]/[4
] (INSTRUMENT) buttons to call up the window to select the instru-
ment.
5-2
Use the [2
]–[7
] buttons to select the Kit, Category and instrument in order.
5-3
Press the [EXIT] button to close the window.
4
5
6
7
2
1
1
5-2
