PSR-S970/S770 Reference Manual
19
1
V
oices
2 DSP
3 EQ
Determines the Frequency and Gain of the low and high EQ bands. Use the [2
]–[4
] buttons for
the low EQ band, and the [5
]–[7
] buttons for the high EQ band.
HARMONY/ARP Page
Same as the display called up via [FUNCTION]
TAB [
E
] MENU 1
[B] HARMONY/ARPEGGIO
(
), with the exception of the following points:
• The details set via the [7
] (DETAIL) buttons are shown on the top of the display.
• The [D] (COMPARE) and [I] (SAVE) buttons are available (see steps 4–5 on
).
Disablin
g
Automatic Selection of Voice Sets (Effects, etc.)
Each Voice is linked to its default VOICE SET parameter settings. Usually these settings are automatically
called up when a Voice is selected. However, you can also disable this feature by the operation in the relevant
display as explained below. For example, if you want to change the Voice yet keep the same effect, set the
EFFECT parameter to OFF (in the display explained below).
1
Call up the operation display.
[FUNCTION]
TAB [
E
] MENU 1
[F] VOICE SET FILTER
2
Use the [A]/[B] buttons to select a keyboard part.
[1
]/
[2
]
CATEGORY
Selects the DSP effect category and type. Select a type after selecting a
category.
[3
]/
[4
]
TYPE
[6
] VARIATION
ON/OFF
Turns the DSP Variation on or off for the selected Voice. This setting
can also be made from the VOICE EFFECT [DSP VARI.] button on the
panel.
[5
]/
[7
]
DETAIL
Calls up a detailed setting display. Press the [5
] button for editing
the standard parameter value, and the [7
] button for editing the
Variation parameter value.
[2
]
–[4
]
PARAMETER
Selects the DSP variation parameter to be set.
[5
]
–[6
]
VALUE
Adjusts the value of the DSP variation parameter.
2
3
