Yamaha PSR-S750, Справочное руководство

Страница: 115 / 118

PSR-S950/S750 Reference Manual
115
11
U
tilit
y
In this display, you can execute one of two reset methods: Factory Reset and Custom Reset. Factory Reset
lets you call up the default initial settings for each item while Custom Reset lets you call up your original
settings with a single touch.
Factory Reset—Restoring the Factory Programmed Settings
This function lets you restore the status of the instrument to the original factory settings.
1
Use the [1

]–[3

] buttons to select the desired item then press the [4

]
buttons to enter or remove the checkmark.
When an item is checkmarked, the corresponding parameters will be reset as described below:
2
Press the [D] (FACTORY RESET EXECUTE) button to execute the Factory Reset
operation for all checkmarked items.
SYSTEM RESET
SYSTEM SETUP Resets the System Setup parameters to the original factory settings. Refer to
the Data List (Parameter Chart) for details about which parameters belong to
System Setup.
MIDI SETUP Resets the MIDI settings including the MIDI Setups on the USER tab display
to the original factory status.
USER EFFECT Resets the current Effect settings and the following data:
• User Effect Types ........................................................................ page 97
• User Master EQ Types ............................................................. page 100
• User Vocal Harmony Types (PSR-S950 only) ............................ page 87
• User Microphone Setting Memories (PSR-S950 only)............... page 82
MUSIC FINDER Resets the Music Finder data (all Records) to the original factory settings.
FILES & FOLDERS Deletes all files and folders including the Expansion folder stored in the USER
tab display.
REGIST Turns off all the Registration Memory [1]–[8] lamps, indicating that no Regis-
tration Memory Bank is selected although all the Registration Memory Bank
files are maintained. In this status, you can create Registration Memory setups
from the current panel settings.
NOTE
The same operation can be done by turning the power on while holding the B5 key (rightmost B key). In this
case, you can create Registration Memory setups from the default panel settings.
Factory Reset
(see below)
Custom Reset
(see
page 116 )