86
PSR-S910/S710 Reference Manual
Connections
– Using
Y
our Instr
ument with Other De
vices –
10
Talk Settings
This function gives you special settings for making announcements between songs, separate from the settings
for your singing performance.
1
Call up the operation display.
[MIC SETTING/VOCAL HARMONY]
→
[I] MIC SETTING
→
TAB [
E
][
F
] TALK SETTING
2
Use the [A]/[B] buttons to select the parameter to be adjusted, then set the value by
using the [1
▲▼
]–[7
▲▼
] buttons.
CAUTION
Settings in the TALK SETTING Page are automatically saved to the instrument when you exit from the display. However, if you turn the
power off without exiting from this display, the settings will be lost.
NOTE
The settings here can be saved to USER or USB as a System Setup file: [FUNCTION]
→
[J] UTILITY
→
TAB [
E
][
F
] SYSTEM RESET. See
.
1 Talk Setting Parameters
2 DSP Parameters
[1
▲▼
]
VOLUME
This determines the output volume of the microphone sound.
[2
▲▼
]
PAN
This sets the stereo pan position of the microphone sound.
[4
▲▼
]
REVERB
DEPTH
These set the depth of the reverb effects applied to the microphone sound.
[5
▲▼
]
CHORUS
DEPTH
This sets the depth of the chorus effects applied to the microphone sound.
[6
▲▼
]/
[7
▲▼
]
TOTAL
VOLUME
ATTENUATOR
This determines the amount of attenuation to be applied to the overall
sound (excepting the microphone input)—allowing you to effectively
adjust the balance between your voice and the overall instrument sound.
[3
▲▼
]
DSP MIC ON/
OFF
This turns the DSP effect applied to the microphone sound ON or OFF.
[4
▲▼
]/
[5
▲▼
]
DSP MIC TYPE
This selects the type of DSP effect to be applied to the microphone sound.
[6
▲▼
]
DSP MIC
DEPTH
This sets the depth of the DSP effect applied to the microphone sound.
