Reference Manual
26
Editing Songs
As desired, edit the User Song and the USB Song for each track in the Song Edit func-
tion to finalize the Song data. Adjustable items (parameters) in the Song Edit function
are Voice, Pitch and Quantize. In addition to these parameters, you can use the Mixer
function to adjust individual track parameters and save the settings while the Song
Edit function is engaged.
1
Select a User Song or a Song on a USB flash memory that con-
tains the data you want to edit.
Available Songs are limited to SMF format with file extension: “.mid.” Preset
Songs cannot be used for editing.
2
Press and hold the [REC] button for longer than a second to call
up the Song Edit display.
The track (Part) selection display appears.
3
Use the dial to select the desired track for editing.
4
Edit the track selected in step 3, then press the [EXECUTE] button.
You can change the “Voice,” “Ch Transpose” and “Quantize” parameters for the
selected track. Use the CATEGORY buttons [
<
] and [
>
] to select “Voice,” “Ch
Transpose” or “Quantize,” then use the dial to adjust the value. As for “Ch Trans-
pose” and “Quantize,” press the [EXECUTE] button to confirm the change.
Repeat steps 3–4 to edit other tracks.
• If there is not enough capac-
ity left on the instrument to
save the data, an appropri-
ate message will appear in
the display. Erase unwanted
data from the instrument to
make more memory avail-
able.
• If a GM2 Song is selected
and step 2 is performed, a
message prompting you to
confirm conversion of the
Song data to the format of
this instrument will appear.
Press the [+/YES] button to
convert the Song data, or
the [-/NO] button to cancel.
• In the Song Mode, you can
edit Songs. If the [SONG
MODE] button is unlit, press
it to turn it on.
NOTE
NOTE
Hold for longer than
a second