USB Flash Memory Operations
PSR-I455 Owner’s Manual
53
Re
fe
re
n
c
e
Formatting a USB Flash Memory
The Format operation lets you prepare commercially
available USB flash memory for use with this instru-
ment is called “Format.”
1
Hold the [FILE CONTROL] button for
longer than a second to call up the File
Control display.
2
Use the CATEGORY [+] and [-] buttons to
call up “Format?.”
3
Press the [0/EXECUTE] button.
A confirmation message will appear. To cancel the
operation, press the [-/NO] button.
4
Press the [0/EXECUTE] button again or
the [+/YES] button to execute the Format
operation.
After a while, a message indicating completion of
the operation appears, and the “USER FILES”
folder will be created on the root directory in the
USB flash memory.
5
Press the [FILE CONTROL] button to exit
from the File Control display.
• The Format operation cannot be cancelled during
execution. Never turn off the power or disconnect the
USB flash memory during the operation. Doing so
may result in data loss.
Format?
NOTICE
Recognizable file location in the USB
flash memory for Song playback (page 24)
• In order to play data copied to a USB flash memory
from a computer or other device, the data must be
stored either in the USB flash memory’s root directory
or a first-level/second-level folder in the root directory.
Data stored in third-level-folders created inside a sec-
ond-level folder cannot be selected and played by this
instrument.
• If playback of an external Song (created via a different
instrument or computer) produces the distorted sound,
decrease the Song Volume (page 47) to reduce the dis-
tortion then adjust the Master Volume (page 14).
IMPORTANT
NOTE
Can be selected/
played.
Cannot be
selected/played.
USB flash memory (Root)
Song
File
Song
File
Song
File
Song
File
