Connecting to Other Devices
PSR-E453/PSR-EW400 Owner’s Manual
37
Qui
ck G
u
ide
You can use a smart device, such as an iPhone or
iPad, with the instrument for a variety of musical pur-
poses by connecting it to the instrument’s [USB TO
HOST] terminal. For details on connections, refer to
the online PDF manual (page 11) “iPhone/iPad Con-
nection Manual.” For information about the compati-
ble smart devices and application tools, access the
following page:
http://www.yamaha.com/kbdapps/
When you output the audio sound of an external
audio device or a computer connected to the [AUX
IN] jack or the [USB TO HOST] terminal through this
instrument, you can cancel or lower the volume of the
melody part of audio playback. You can use the func-
tion to practice the melody part along with the audio
playback.
1
Play back audio on the connected exter-
nal device.
2
Press the [MELODY SUPPRESSOR] but-
ton to turn it on.
3
Press the [MELODY SUPPRESSOR] but-
ton again to turn it off.
Files that can be transferred from a computer
to this instrument (and vice versa).
• Song file: .mid (SMF format 0/1)
• Style file: .sty
• Backup file: PSR-E453.BUP* (PSR-E453)/
PSREW400.BUP* (PSR-EW400)
* Backup parameters (page 39) can be transferred and
saved to a computer via Musicsoft Downloader as a single
file.
• Use an AB type USB cable of less than 3 meters. USB 3.0
cables cannot be used.
• If you are using a DAW (digital audio workstation) with this
instrument, set the Audio Loop Back (page 60) to OFF. Oth-
erwise, a loud sound may occur, depending on the settings
of the computer or the application software.
• The volume can be adjusted on the computer, and also by
using the instrument’s [MASTER VOLUME] control. If you
want to adjust the volume balance between the audio input
from the external device and Song/Style/Pattern, use the
[ASSIGN] button to select Function number 5, then turn Knob
A (page 46).
The audio input volume from the [USB TO HOST] terminal can
also be adjusted in the Function Settings (page 58, Function
005).
Connecting to an iPhone/iPad
• If you are using a DAW (digital audio workstation) with this
instrument, set the Audio Loop Back (page 60) to OFF. Oth-
erwise, a loud sound may occur, depending on the settings
of the computer or the application software.
• Up to 256 Song files can be transferred to this instru-
ment.
• If you transfer a Style file from the computer to this
instrument, you need to load it to this instrument for Style
playback. For details, refer to “Loading a Style File”
(page 67).
NOTE
NOTICE
NOTE
NOTICE
• The volume can be adjusted on the smart device, and also by
using the instrument’s [MASTER VOLUME] control. If you
want to adjust the volume balance between the audio input
from the external device and Song/Style/Pattern, use the
[ASSIGN] button to select Function number 5, then turn Knob
A (page 46).
The audio input volume from the [USB TO HOST] terminal can
also be adjusted in the Function Settings (page 58, Function
005).
Using the Melody Suppressor
• Depending on the particular music source, the melody
or vocal sound may not be cancelled as expected even
when if the Melody Suppressor is turned on. In such a
case, try adjusting the pan position to be cancelled in
the Function Settings (page 59, Function 039).
• When the instrument is connected to the [USB TO
HOST] terminal, and Audio Loop Back (page 60, Func-
tion 058) is set to OFF, the Melody Suppressor function
cannot be used.
NOTE
MelodySP
on
NOTE
Содержание PSR-EW400
Страница 75: ...PSR E453 PSR EW400 Owner s Manual 75 MEMO ...
Страница 78: ......