Yamaha PSR-E373, Руководство пользователя

Страница: 49 / 92

Playing an Device with the Built-in Speakers
PSR-E373, PSR-EW310, YPT-370 Owner’s Manual
49
Re
fe
re
n
c
e
When you output the audio sound of an external
audio device or a computer connected to the [AUX
IN] jack or the [USB TO HOST] terminal through this
instrument, you can cancel or lower the volume of
the melody part of audio playback. You can use the
function to practice the melody part along with the
audio playback.
1
Play back audio on the connected exter-
nal device.
2
Hold down the [FUNCTION] button for
lon
g er than a second to call up “Melo-
dySP.”
3
Press the [+/YES] button to select “on.”
4
To cancel the Melody Suppressor func-
tion, select “oFF” via “MelodySP” (Func-
tion 043; pa
g e 54) by executin g steps 2
and 3.
When the melody or vocal sound may not
be canceled (or lowered) as expected
1
Press the [FUNCTION] button several
times to call up “SupprPan” (Function
044; pa
g e 54) while the Melody Suppres-
sor function is turned on.
2
Adjust the pan position of the sound to
be cancelled (lowered) by usin
g the [+/
YES], [-/NO] buttons.
Lowering the volume of a melody
part (Melody Suppressor function)
• When the instrument is connected to the [USB TO HOST]
terminal, and Audio Loop Back (page 54, Function 042)
is set to OFF, the Melody Suppressor function cannot be
used.
MelodySP on
Appears when Melody
Suppressor is on
Hold for longer
than a second.
NOTE
SupprPan C
044
L63 – C – R63
(Left – Center – Right)
• Depending on the particular music content, the melody
or vocal sound may not be canceled as expected even if
the Melody Suppressor is turned on.
NOTE