Yamaha PortaTone PSR-8000, Руководство пользователя

Страница: 46 / 206

46
,,,,,,,,,,,,,,,,,,
,,,,,,,,,,,,,,,,,,
QQQQQQQQQQQQQQQQQQ
QQQQQQQQQQQQQQQQQQ
¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢
¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢
,,,,,,,,,,,,,,,,,,
,,,,,,,,,,,,,,,,,,
,,,,,,,,,,,,,,,,,,
QQQQQQQQQQQQQQQQQQ
QQQQQQQQQQQQQQQQQQ
QQQQQQQQQQQQQQQQQQ
¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢
¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢
¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢
In a sophisticated instrument with as many controls and functions as the PSR-
8000, the Registration Memory is a vital feature. It can be used to memorize 128
complete control-panel setups (16 banks, 8 setups each) that you can recall
whenever needed simply by pressing a single button.
• Registration data can be saved to and loaded from floppy disk as required (pages 140, 141).
• See page 171 for a complete listing of the data stored by the Registration Memory.
Registering the Panel Settings
To register a panel setup first make the desired control settings, then press one of the REGISTRATION MEMORY
buttons ([1] … [8]) while holding the [MEMORY] button.
FREEZE
REGIST BANK 1~16 MEMORY
REGISTRATION MEMORY
1 2 3 4 5 6 7 8
FREEZE
REGIST BANK 1~16
If you want to select a different registration bank prior to
registering a setup, use the REGIST BANK 1-16 [–] or [+]
button to select the desired memory bank — the bank number
is shown next to
REG. BANK
in the upper right corner of the
display.
When a setup is registered, the current bank, registration
number and name for that setup will appear in the upper left
corner of the display. You can enter original names for each
registration setup via the F4: REGISTRATION NAME func-
tion display described on page 127.
• Any previous data in the specified registration memory will be erased
and replaced by the registered panel settings.
• You can jump directly to the F4: REGIS-
TRATION NAME function display by press-
ing a REGISTRATION MEMORY button
([1] … [8]) while holding the [DIRECT
ACCESS] button.
Registration Memory
Registration Memory