![Yamaha PortaTone PSR-280 Скачать руководство пользователя страница 74](http://html.mh-extra.com/html/yamaha/portatone-psr-280/portatone-psr-280_owners-manual_897611074.webp)
MIDI Functions
74
4
Press the [START/STOP] button.
Start the Initial Setup Send operation.
5
Start recording on the sequencer, then send the Initial
Setup data.
Start recording on the sequencer in the normal way, then — with as little
delay as possible — press the [+] button to actually start transmitting the
data.
An “End” message briefly appears in the display when the operation is com-
plete.
6
Stop recording on the sequencer.
Stop recording on the sequencer in the normal way. Make sure that any sub-
sequently recorded performance data is recorded at least one measure fol-
lowing the Initial Setup data.
Local Control
This function lets you enable or disable keyboard control over the PSR-280’s
voices. This would come in handy, for example, when recording notes to MIDI
sequencer. If you are using the sequencer to play back the voices of the PSR-280,
you would want to set this to “off” — in order to avoid getting “double” notes,
both from the keyboard and from the sequencer. Normally, when playing the PSR-
280 by itself, this should be set to “on.”
1
Select the local control on.
While holding the lowest D key and turnning on the power.
End
• When the Initial Setup Send
operation is completed, the PSR-
280 automatically returns to the
previous panel condition.
• Select the local control off. Sim-
ply turning on the power again.
Содержание PortaTone PSR-280
Страница 1: ......
Страница 91: ...COVER 3 ...
Страница 92: ...M D G EMI Division Yamaha Corporation 2000 Yamaha Corporation V524150 00 PO 01A0 Printed in China ...